Physical Features
5
On/off key.
Makes a selection on the screen.
Shows the previous screen.
Softkeys. The function of the softkey is shown above the
key.
Cable test wire mapping input. Connect the cable from
the top Ethernet port to this port to view the wire map
details.
Ethernet 10/100/1000BASE-X port.
Fiber port. Use one of the many supported SFP adapters
to connect to the network.
Tx/Rx - The LED blinks when the tester transmits and
receives data.
The LED is on when the tester is linked to the network.
Full-color LCD.
Softkeys. The function of the softkey is shown above the
key.
Shows the Home screen.
O
: Clears the current measurement data.
P
: Saves the
current measurements data into a report file which can
be transferred to the LinkRunner Manager PC
application and viewed/printed.
Navigation keys. The outer ring of keys (four) perform
the left/right and up/down screen navigation.
Connector for the ac adapter.
USB port for connection to a PC.
Kensington lock slot.
Screw for the battery pack.
The LED turns on when you connect the ac adapter. The
LED is red when the battery is charging and green when
the battery is fully charged.
Summary of Contents for LinkRunner AT 1000
Page 4: ......
