Current Probe
Probe
Operating
Instructions
5
Probe Operating Instructions
The following sections list the Probe operating instructions.
Connections
For these connections, refer to Figures 1 and 2. To connect the Probe, do the
following:
1.
Connect the BNC connector, to the oscilloscope input. Ensure that the
input impedance is
≥
1 M
Ω
.
2.
Connect a
±
12 V external power supply to the power supply connector on
the Probe interface. Do not switch on the power supply until the power
supply connections are made using the power supply cable with or without
the adapter provided.
3.
When measuring currents with fast voltage variations (high dv/dt) of the
primary current, connect the ground terminal on the Probe to ground.
Probe Head Cable
i50s
(Power Supply)
Other
Power Supply
Power Supply Adapter
Probe Supply Cable
exi02f.eps
Figure 2. Connections
Summary of Contents for i50s
Page 4: ...i50s Users Manual ii...
