5
Connector for the AC adapter.
RJ45 connector: Lets you connect to a network for access to Fluke Networks
cloud services.
Removable tip for different types of connectors.
Dial for focus adjustment.
The button starts the FiberInspector test and switches the probe between still
and live modes.
How to Do a FiberInspector Test
1. Power the Tester
Charge the battery if necessary. Connect the ac adapter to ac power and to
the adapter connector (
) shown in Figure 1. You can use the tester while
the battery charges.
2. Connect the FI-1000 Probe
With the tester off, connect the probe to the type A USB port on the side of
the tester. Then turn on the tester. Figure 2 shows the home screen for a
FiberInspector test.
-continued-
Figure 2. Panels on the Home Screen
I03.EPS
To set up a project, tap the
PROJECT
panel.
To change settings for the
test, tap the test setup panel.
To set up cable IDs, turn on
Auto Save
,
and change the settings for the fiber
End
,
tap the
Next ID
panel.
To upload results to LinkWare Live, tap
SYNC
.
A
B
C
D
