background image

2

 The kits include these items:

Symbols

Two RJ45 tips

Two latches

Two screws

Two conductive washers

Two top and bottom cases 
(DSX kits only)

Two conductive pads 
(DSX-PLA-804-RKIT only)

Installation instructions

W

Warning or Caution: Risk of damage or destruction to 
equipment or software. See explanations in the manuals.

Consult the user documentation.

~

This product complies with the WEEE Directive marking 
requirements. The affixed label indicates that you must 
not discard this electrical/electronic product in domestic 
household waste. Product Category: With reference to the 
equipment types in the WEEE Directive Annex I, this 
product is classed as category 9 "Monitoring and Control 
Instrumentation" product. Do not dispose of this product 
as unsorted municipal waste. To return unwanted 
products, contact the manufacturer’s web site shown on 
the product or your local sales office or distributor.

40 year Environment Friendly Use Period (EFUP) under 
China Regulation - Administrative Measure on the Control 
of Pollution Caused by Electronic Information Products. 
This is the period of time before any of the identified 
hazardous substances are likely to leak out, causing 
possible harm to health and the environment.

Summary of Contents for DSX-PLA-004-RKIT

Page 1: ...KIT DSX PLA 804 RKIT DTX PLA002PRP Replacement Parts for DSX and DTX Permanent Link Adapters Installation Guide These kits are sets of RJ45 tips latches and cases that replace worn parts on these DSX and DTX permanent link adapters Kit Adapter DSX PLA 004 RKIT DSX PLA004 DSX PLA 804 RKIT DSX PLA804 DTX PLA002PRP DTX PLA002 ...

Page 2: ...ct in domestic household waste Product Category With reference to the equipment types in the WEEE Directive Annex I this product is classed as category 9 Monitoring and Control Instrumentation product Do not dispose of this product as unsorted municipal waste To return unwanted products contact the manufacturer s web site shown on the product or your local sales office or distributor 40 year Envir...

Page 3: ...ch as shown below 3 Make sure that the conductive washer is on the case screw as shown below For DSX PLA804 adapters make sure to put the conductive pads in the case top and bottom 4 Reassemble the connector case then tighten the screw HFN00 EPS How to Replace the Tip and Latch Conductive pads DSX PLA 804 RKIT only Conductive washer Latch Tip Pin Hole WCaution Do not break the pin ...

Page 4: ...works Fluke Networks operates in more than 50 countries worldwide For more contact information visit our website LIMITED WARRANTY Parts accessories product repairs and services are warranted for 90 days unless otherwise stated See the product manual for details 4 15 www flukenetworks com support info flukenetworks com 1 800 283 5853 1 425 446 5500 Fluke Networks 6920 Seaway Boulevard MS 143F Evere...

Reviews: