Fluke DSX-CHA-M12-X-S Manual Download Page 10

10

LIMITED WARRANTY AND LIMITATION OF LIABILITY

Fluke Networks mainframe products will be free from defects in material and 
workmanship for one year from the date of purchase, unless stated otherwise 
herein. Parts, accessories, product repairs and services are warranted for 90 
days, unless otherwise stated. Ni-Cad, Ni-MH and Li-Ion batteries, cables or 
other peripherals are all considered parts or accessories. This warranty does 
not cover damage from accident, neglect, misuse, alteration, contamination, or 
abnormal conditions of operation or handling. Resellers are not authorized to 
extend any other warranty on Fluke Networks’ behalf. To obtain service during 
the warranty period, contact your nearest Fluke Networks authorized service 
center to obtain return authorization information, then send your defective 
product to that Service Center with a description of the problem.
For a list of authorized resellers, visit 

www.flukenetworks.com/wheretobuy

.

THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH 
AS FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED. 
FLUKE NETWORKS IS NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL 
OR CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR 
THEORY. Since some states or countries do not allow the exclusion or limitation 
of an implied warranty or of incidental or consequential damages, this 
limitation of liability may not apply to you.
4/15

Fluke Networks 
PO Box 777  
Everett, WA 98206-0777 
USA

Summary of Contents for DSX-CHA-M12-X-S











Reviews: