Fluke D4V-8122Z User Manual Download Page 2

LIMITED WARRANTY AND LIMITATION OF LIABILITY 

Each Fluke product is warranted to be free from defects in material and workmanship 
under normal use and service. The warranty period is one year and begins on the date of 
shipment. Parts, product repairs, and services are warranted for 90 days. This warranty 
extends only to the original buyer or end-user customer of a Fluke authorized reseller, 
and does not apply to fuses, disposable batteries, or to any product which, in Fluke's 
opinion, has been misused, altered, neglected, contaminated, or damaged by accident or 
abnormal conditions of operation or handling. Fluke warrants that software will operate 
substantially in accordance with its functional specifications for 90 days and that it has 
been properly recorded on non-defective media. Fluke does not warrant that software will 
be error free or operate without interruption. 

Fluke authorized resellers shall extend this warranty on new and unused products to end-
user customers only but have no authority to extend a greater or different warranty on 
behalf of Fluke. Warranty support is available only if product is purchased through a Fluke 
authorized sales outlet or Buyer has paid the applicable international price. Fluke re-
serves the right to invoice Buyer for importation costs of repair/replacement parts when 
product purchased in one country is submitted for repair in another country. 

Fluke's warranty obligation is limited, at Fluke's option, to refund of the purchase price, 
free of charge repair, or replacement of a defective product which is returned to a Fluke 
authorized service center within the warranty period. 

To obtain warranty service, contact your nearest Fluke authorized service center to obtain 
return authorization information, then send the product to that service center, with a de-
scription of the difficulty, postage and insurance prepaid (FOB Destination). Fluke as-
sumes no risk for damage in transit. Following warranty repair, the product will be re-
turned to Buyer, transportation prepaid (FOB Destination). If Fluke determines that failure 
was caused by neglect, misuse, contamination, alteration, accident, or abnormal condition 
of operation or handling, including overvoltage failures caused by use outside the prod-
uct’s specified rating, or normal wear and tear of mechanical components, Fluke will pro-
vide an estimate of repair costs and obtain authorization before commencing the work. 
Following repair, the product will be returned to the Buyer transportation prepaid and the 
Buyer will be billed for the repair and return transportation charges (FOB Shipping Point). 

THIS WARRANTY IS BUYER'S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF 
ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED 
TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PAR-
TICULAR PURPOSE. FLUKE SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, 
INCIDENTAL, OR CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS OF 
DATA, ARISING FROM ANY CAUSE OR THEORY. 

Since some countries or states do not allow limitation of the term of an implied warranty, 
or exclusion or limitation of incidental or consequential damages, the limitations and ex-
clusions of this warranty may not apply to every buyer. If any provision of this Warranty is 
held invalid or unenforceable by a court or other decision-maker of competent jurisdiction, 
such holding will not affect the validity or enforceability of any other provision. 

Fluke Corporation 
P.O. Box 9090 
Everett, WA  98206-9090 
U.S.A. 

Fluke Europe B.V. 
P.O. Box 1186 
5602 BD Eindhoven 
The Netherlands 

 

 

 

11/99 

 

To register your product online, visit 

register.fluke.com

 

Summary of Contents for D4V-8122Z























Reviews: