EI-162BN
Users Manual
2
Safety Regulations
This device is only to be installed and operated by qualified personnel in
compliance with the safety precautions and regulations that follow.
Additionally, use of this device requires compliance with all legal and safety
regulations pertaining to each specific application. Similar regulations apply to
the use of accessories.
Qualified personnel are persons familiar with the setup, installation and
operation of the device, are formally qualified to perform activities like
training and instruction, and are authorized to switch on and off, isolate,
ground, and label electric circuits and instruments/systems in accordance with
safety engineering standards.
In this manual, a
W
Warning
identifies hazardous conditions and actions that
could cause bodily harm or death. A
W
Caution
identifies conditions and
actions that could damage the instrument or the equipment under test, cause
permanent loss of data, or impair instrument performance. Disregarding
warning and caution notices can lead to serious physical injury and material
damage.
Fault-free and safe operation of this device requires suitable transport, storage,
setting up, and assembly, as well as careful operation and maintenance.
If there is reason to believe that safe operation is no longer possible, the device
must be put out of operation immediately and must be protected against
accidental usage.
XW
Warning
Operating electrical devices implies that parts of the
device could carry dangerous voltages. To avoid electrical
shock or damage to the device:
•
If this product is used in a manner not specified by the
product specifications, the protection provided may be
impaired.
•
While a measurement is in progress, do not touch the
Transformer, transmission line pylon, earth ground
electrode, auxiliary electrode, or probe.
