background image

LIMITED WARRANTY AND LIMITATION OF LIABILITY

This Fluke product will be free from defects in material and workmanship 

for one year from the date of purchase. This warranty does not cover 

fuses, disposable batteries, or damage from accident, neglect, misuse, 

alteration, contamination, or abnormal conditions of operation or handling. 

Resellers are not authorized to extend any other warranty on Fluke’s 

behalf. To obtain service during the warranty period, contact your nearest 

Fluke authorized service center to obtain return authorization information, 

then send the product to that Service Center with a description of the 

problem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER 

WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR PURPOSE, 

ARE EXPRESSED OR IMPLIED. FLUKE IS NOT LIABLE FOR ANY 

SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES 

OR LOSSES, ARISING FROM
ANY CAUSE OR THEORY. Since some states or countries do not allow 

the exclusion or limitation of an implied warranty or of incidental or 

consequential damages, this limitation of liability may not apply to you.

11/99

Fluke Corporation

P.O. Box 9090

Everett, WA 98206-9090 

U.S.A.

Fluke Europe B.V.

P.O. Box 1186 

5602 BD Eindhoven 

The Netherlands

Beijing Fluke
Rm101, 1/F.,Tong Heng Tower
No. 4 Hua Yuan Road Hai Dian

District, Beijing 100088, P.R.C.

Summary of Contents for 80i-2010s









Reviews: