background image

718 Series 
Users Manual 

 

20 

Maintenance 

XW

Warning 

To avoid possible electric shock, personal 
injury, or sudden release of pressure, review 
“Safety Information” earlier in this manual 
before proceeding. 

Remove test leads before opening. 

For maintenance procedures not described in this 
instruction sheet, or if the Calibrator needs repair, contact 
a Fluke Service Center. 

In Case of Difficulty 

 

Check the battery, test leads, pressure module, and 
pressure tubing. Follow replacement and connection 
instructions properly. 

 

Review this instruction sheet to make sure you are 
using the Calibrator correctly. 

If the Calibrator needs repair, and the Calibrator is under 
warranty, see the warranty statement for terms. If the 
warranty has lapsed, the Calibrator can be repaired and 
returned for a fixed fee. 

Cleaning 

Periodically wipe the case with a damp cloth and 
detergent; do not use abrasives or solvents. 

Calibration 

Fluke recommends that you calibrate your Calibrator once 
a year to ensure that it performs according to its 
specifications. A calibration manual is available (PN 
686540). Call 1-800-526-4731 from the U.S.A. and 
Canada. In other countries, contact a Fluke Service 
Center. 

Summary of Contents for 718 Series





































Reviews: