562/563
Users Manual
12
The display shows the present reading, maximum and minimum
readings, and the emissivity setting.
To turn on the Avg/Dif mode:
1. Push
the
Menu
softkey until
Avg
shows as the right
softkey function.
2. Push
the
Avg
softkey.
The display shows the present reading, average reading, the
differential reading between max and min (designated by
Δ
),
and the emissivity setting.
Note
Min, Max, Avg, and Differential readings are saved as
part of the saved data when either Min/Max or Avg/Dif
mode is enabled.
Alarm
The Product has a programmable high and low temperature
alarm to assign high or low readings. When the alarm level is
reached, an alarm sounds and the display flashes orange and
white.
To set the high or low alarm:
1. Push
the
Menu
softkey until
Alarm
shows as the right
softkey.
2. Push
the
Alarm
softkey to access the Alarm menu.
3. Push
the
Hi
or
Lo
softkey as necessary.
4. Push
the
ON
or
OFF
softkey to turn the alarm on or off.
5. Use
the
Set
softkey to access the Hi or Lo Alarm Set
menu.
6.
Use the down or up softkeys to change the alarm setting.
7.
After the settings are completed, push the
Done
softkey.
Summary of Contents for 562
Page 36: ...562 563 Users Manual 32 ...
