Precision Infrared Calibrator
Menu Structure
13
Menu Structure
Temperature Setup Menu
The Temperature Setup menu is shown in Figure
.
Figure 2. Temperature Setup Menu
MAIN MENU
F1
F2 F3
F4
TEMP SETUP
PROG MENU
SYSTEM MENU
VIEW TEMP
F1
SCAN <change the scan rate and enable alarms>
SCAN RATE: <edit>
STABLE
LIMIT:
<edit>
STABLE
ALARM:
(ENABLE/DISABLE)
<select>
F2
IRT
IRT
: <edit>
F3
CUTOUT <modify hard and soft cutout>
SOFT
CUTOUT:
<edit>
HARD
CUTOUT:
<view
only>
Buttons
SET PT.
- SET
TEMPERATURE
SETPOINT
SETPOINT:
<set point temperature> <edit>
ENTER
<enable control of the instrument>
F1
– SELECT PRESET <1-8> <select>
F1
– EDIT PRESET <1-8> <edit>
F4
– SAVE/DISABLE <disables control of the instrument>
ºC / ºF
-
Units: <°C, °F>
Up/ Down Arrow Buttons <contrast adjust> <toggle>
Up
:
Lighter
Down
:
Darker
F1
and
F4
(simultaneiously)
<reset to English language>
F1
and
F3
(simultaneiously)
<turn off button push beep>
