Power Quality Logger
Using the 1745 Power Quality Logger
17
•
Use the Logger only with its original standard
equipment or with approved optional accessories as
listed in Table 2 and Table 3 in this manual.
•
Connect clip-on current transformers and/or Flexi Set
to insulated live conductors only.
•
If measuring sensors are to be connected to non-
insulated live conductiors, additional personal
protective measures must be taken as required by local
government agencies.
W
Caution
To avoid damage, use the 1745 Power Quality Logger only
with the following nominal voltages:
Single/3-phase 4-wire (Wye) systems (P-N): 69 V to 480 V
3-phase-3-wire (Delta) systems (P-P): 120 V to 830 V
WX
Warning
To avoid electrical shock, or damaging the Logger’s
internal protective circuitry or weatherproof seal, do not
open the Logger.
Summary of Contents for 1745
Page 12: ...1745 Users Manual iv ...
Page 14: ...1745 Users Manual vi ...
Page 72: ...1745 Users Manual 58 ...
