5322A-LOAD
Instructions
2
Symbols
The symbols used in these instructions and on
the Product are shown in Table
1
.
Table 1. Symbols
Symbol Description
X
WARNING. HAZARDOUS VOLTAGE. Risk
of electric shock.
W
WARNING.RISK OF DANGER. Risk of
electric shock.
Consult user documentation.
)
Certified by CSA Group to North American
safety standards.
P
Conforms to European Union directives.
Conforms to relevant Australian Safety and
EMC standards.
AC (Alternating Current)
.
Protective conductor terminal
Earth
Fuse
Conforms to relevant South Korean EMC
Standards.
~
This product complies with the WEEE
Directive marking requirements. The affixed
label indicates that you must not discard this
electrical/electronic product in domestic
household waste. Product Category: With
reference to the equipment types in the
WEEE Directive Annex I, this product is
classed as category 9 "Monitoring and
Control Instrumentation" product. Do not
dispose of this product as unsorted
municipal waste.
Preparing for Operation
The Product (see Figure 2) comes with a power line
adapter (to run the cooling fans), a ground cable, three
shorting cables, and these instructions.
The power line adapter comes with five mains plug
adapters that are compatible with different power plug
configurations.
Prior to use:
1. Select the appropriate plug adapter that matches
the local power mains outlet.
2. Attach the plug to the power line adapter. The
power line adapter is now ready for use with the
Product.
3. Once you place the Product on top of the
Calibrator, connect the grounding cable between
the Product’s rear-panel ground terminal and the
rear-panel ground terminal of the Calibrator. See
the grounding cable connection in Figure 3 where
the rear of the Product is shown.
XW
Warning
To prevent possible electrical shock, fire,
or personal injury:
•
Make sure that the ground terminal on
the rear of the Product is connected to
the ground (GND) terminal on the rear
of the Calibrator. Any application with
non-grounded housing is strictly
prohibited.
•
Use only the shrouded high-voltage
banana plug jumpers that are supplied
with this Product to connect resistor
values. Connect the black terminal first
and disconnect the black terminal last
when you connect resistors.
