Fluke Calibration 4184297, User Manual

Page: 47 / 48

8-1
Chapter 8
Ancillary Equipment
Dirt/Moisture Trap, P5531
If there is any doubt that the instrument to be tested is not internally clean, then the
addition of the P5531 Dirt/Moisture Trap will protect the deadweight tester from
contamination and possible damage. Any particles or moisture present within the DUT
will fall into the clear, acrylic chamber, where they can be seen by the operator.
The top connection reproduces the test port on the deadweight tester, allowing the
standard gauge adapters to be used.
gjn030.bmp
Figure 8-1. Dirt/Moisture Trap