manualshive.com logo in svg

FLUIDX GasCheck G Series, User Manual

Share
Download
FLUIDX GasCheck G Series User Manual Download Page 7

LACO USER MANUAL - GASCHECK G SERIES

4

© 2018 FLUIDX Equipment, Inc.

3.3 

IMPORTANT NOTES

The GasCheck G Series range is NOT intrinsically safe, so it should not be 
used in potentially explosive environment. Intrinsically safe GasCheck 
instruments are available; please contact Portable Leak Detectors for more 
information.

•  Ambient air pressure, heat, and humidity can also affect readings.

•  The GasCheck G range is NOT “gas specific”, i.e., it cannot differentiate 

between gases.

3.4 

PACKING LIST

Please remove all packing material and then check the content of the 
carry case against the list below before use. Should the instrument or any 
accessory appear damaged or missing, contact the instrument supplier for 
advise before use.

Table 4:  Packing List

ITEM QTY DESCRIPTION

CHECK

1

1

GasCheck G instrument w/short probe and nozzle fitted

2

1

Long Probe

3

1

Box wrench to change probe

4

1

Spare battery clip

5

1

User manual

6

1

Calibration certificate

7

1

CD containing additional product information

Summary of Contents for GasCheck G Series






















Reviews:

No comments

Brands by name

Popular brands

Load more brands