FW-N410-P-M_v0203_01_EN
Page 4
INTENDED USE
The N-SERIES is intended for use in safe areas (ordinary locations). The N-SERIES is designed
and constructed for measurement purposes in industrial processes to show the flowrate, the total
and the accumulated total of a medium that passes a sensor. For details, refer to the chapter:
Technical specifications.
Mechanical work
Only qualified and well-trained persons who are familiar with the mechanical installation and the
service procedures and who obey the specific regulations and the requirements set by the
authorities, the manufacturer, the employer and the plant owner, are allowed to do the mechanical
work.
Electrical work
Only qualified and well-trained persons who are familiar with the electrical installation and the
service procedures and who obey the specific regulations and requirements set by the authorities,
the manufacturer, the employer and the plant owner, are allowed to do the electrical work.
UNINTENDED USE
A hazardous situation may occur if the N-SERIES is not used for the purpose it was designed
for or is used incorrectly. Please obey the information as given in this instruction manual:
▪
Do not use the N-SERIES in a hazardous area.
▪
Do not use the N-SERIES in life support applications. A possible malfunction of the N-SERIES
can cause (serious) injury or death to persons.
TARGET GROUP
This publication is aimed at the persons who are:
▪
involved in the preparation of the required work;
▪
involved in the installation, commissioning work and use of the N-SERIES;
▪
appointed to supervise the required work;
▪
appointed for the certification, the occupational, health, safety and the quality tasks.
WARRANTY AND TECHNICAL SUPPORT
For warranty and technical support for your Fluidwell products,
visit our internet site
or contact us at
