HF131PEN_v0501_05
Page 7
2. OPERATIONAL
2.1. GENERAL
The F131-P may only be operated by personnel who are authorized and trained by the
operator of the facility. All instructions in this manual are to be observed.
Take careful notice of the " Safety rules, instructions and precautionary measures " in
the front of this manual.
This chapter describes the daily use of the F131-P. This instruction is meant for users / operators.
2.2. CONTROL
PANEL
The following keys are available:
Fig. 2: Control Panel.
Functions of the keys
This key is used to program and save new values or settings.
It is also used to gain access to SETUP-level; please read chapter 3.
This key is used to START the batch process.
The arrow-key
is used to increase a value after PROG has been pressed
or to configure the unit; please read chapter 3.
Press STOP to "PAUSE" the batch process. When this key is pressed twice,
the process is completely finished and can't be continued.
STOP is also used to select Total and accumulated total.
After PROG has been pressed, the arrow-key
is used to select a value
STOP
