HF126PEN_EG_IA_TP_v0501_04
Page 6
Configuration of the unit
The F126-P-EG was designed to be implemented in many types of applications. For that reason, a
SETUP-level is available to configure your F126-P-EG according to your specific requirements.
SETUP includes several important features, such as Span, measurement units, signal selection etc.
All setting as are stored in EEPROM memory and will not get lost in case of power break-down or
empty battery.
To extend the battery-life time (option), please make use of the power-management functions as
described in chapter 3.2.3.
Display information
The unit has a large transflective LCD with all kinds of symbols and digits to display measuring units,
status information, trend-indication and key-word messages.
Flowrate and totals can be displayed either with the small 8mm digits or with the 17mm digits.
A backup of the total and accumulated total in EEPROM memory is made every minute.
Options
Following options are available: isolated or active 4-20mA / 0-10V / 0-20mA analog output, full
Modbus communication RS232/485 (also battery powered), intrinsic safety, power- and sensor-
supply options, panel-mount, wall-mount and weather-proof enclosures, flame proof enclosure.