Page 7
FW-F093-P-M_v0404_01_EN.docx
2 OPERATIONAL
2.1
GENERAL INFORMATION
This chapter describes the daily use of the F093-P. This instruction is meant for users / operators.
•
The F093-P may only be operated by personnel who are authorized and trained by the
operator of the facility. All instructions in this manual are to be observed
•
Take careful notice of the "Safety rules, instructions and precautionary measures" in the
front of this manual.
2.2
CONTROL PANEL
The control panel has three keys. The following keys are available:
Fig. 2: Control panel.
Functions of the keys
PROG
-key
This key is used to program and save new values or settings.
The PROG-key is also used to gain access to SETUP-level; please read chapter 3.
SELECT
-key
This key is used to SELECT the displayed information.
CLEAR
-key
This key is used to CLEAR the value of total.
2.3
OPERATOR INFORMATION AND FUNCTIONS
In general, the F093-P will always function at Operator level. The information displayed is dependent
upon the SETUP-settings. The signal from the connected tachometer is processed by the F093-P in
the background, whichever screen refresh rate setting is chosen. After pressing a key, the display
will be updated very quickly during a 30 second period, after which it will slow-down again.
Fig. 3: Example of display information during process.
Auto toggle
