6
INSTALLING THE CLEANER
a wide variety of swimming pools. Both the standard in-
Note:
valve cap for the regulator valve may not be needed.
Figure 6
1.
2.
line from the skimmer to which the cleaner will be
connected.
3. Insert the vacuum plate.
4. Insert the threaded cu
ff
into the vacuum plate
Figure 6
or use the conical adaptor if vacuum plate has non
standard thread
Figure 7
.
5. Press the regulator valve int
o the threaded cuff or
conical adapter. The valve’s adjustment knob should
be pointing up
6. Place cleaner into the pool. Turn it side to side and
front to back to release any trapped air, allowing the
cleaner to sink to the floor of the pool
until it is
completely filled with water and purged of air.
Note:
If air is pulled into the pool plumbing it may
cause your pump to lose prime.
8. Insert the end of the hose through the skimmer
opening and connect the hose directly onto the
regulator valve. See
Figure 7
Figure 7
