view, refer to the
Adding an aerial map to the FMQuadro view
section in
6.5.4. Advanced tools
The Advanced Tools window contains tools to diagnose the condition of
the wireless network.
• The Ping test tool sends pings to a user-specified IP address.
• The Bandwidth test tool tests the bandwidth capacity of the wireless
link between the Fluidmesh unit and a user-specified IP address.
• The Path MTU tool tests the size of the maximum transmission unit.
To open the Advanced Tools dialog, click the
-advanced tools
link under
NETWORK CONTROL
in the left-hand settings menu.
Using the Ping test tool
The Ping test can be run while the network is under load (to test
operational performance), or with the network unloaded (to test installed
capacity). To use the Ping test tool, do the following steps:
1.
Determine which wireless link is to be tested between the
Fluidmesh unit and another unit in the wireless network. Get the
IP address of the other unit.
2.
Enter the IP address of the other unit in the
Ping (10 packets
only)
field (
Figure 44. Advanced Tools window (Ping test tool)
Fluidmesh 4200 FIBER
© Fluidmesh Networks LLC
Page 95 of 180