1.
Enable and configure network time protocol (NTP) as shown in
“NTP Configuration” (page 122)
.
2.
Click the
-radius
link under
ADVANCED SETTINGS
in the left-
hand settings menu.
• The
RADIUS
dialog will be shown (
Figure 60. Configurator GUI (RADIUS dialog)
3.
Choose the RADIUS mode for the device by clicking the
RADIUS
Mode
drop-down and selecting one of the following options:
•
Disabled
: RADIUS functionality will be disabled.
•
Enabled
: RADIUS functionality will be enabled, and the
configuration options will be shown.
•
Passthrough
: If the device is a trackside-mounted Fluidity
device, this parameter can be used to simultaneously
activate RADIUS device authentication, and enable
RADIUS passthrough (communication between RADIUS-
authenticated vehicle-mounted devices and non-
authenticated trackside-mounted devices).
4.
Enter the IP address or host name of the RADIUS server in the
IP
address / hostname
field.
Fluidmesh 4200 FIBER
© Fluidmesh Networks LLC
Page 120 of 180