2
T
3”
1
S
Locking
ring
1
2
3
18
17
16
15
14
13
12
11
10
9
8
7
6
18
17
16
15
14
13
12
11
10
9
8
7
6
(1) Put shank washer (S), onto fill valve
shank and (2) place fill valve in tank.
Check height of the fill valve. It must be
approximately 3” higher than the
overflow tube. Adjust by twisting the
threaded shank in or out.
NOTE:
DO NOT move the locking ring
to adjust shank.
(1) Place fill valve in tank.
(2) Fasten fill valve lock nut (T) to shank
(3) hand tighten.
NOTE: DO NOT over-tighten.
www.fluidmaster.com
7
3.2 Reconnect
3.3 Adjust
Install
3.4
