8
9
STEP 6:
FINISHING STEPS
A:
ATTACH WATER SUPPLY
CONNECTOR TO FILL VALVE
Twist to tighten.
*Hand-tighten only.
DO NOT OVER TIGHTEN.
C:
WATER LEVEL
After the tank stops filling, water level should fill the tank to
roughly ½ inch below top of overflow pipe to ensure a
proper flush. (Does not need to be exact.)
B:
TURN ON WATER
Check for leaks.
Over tightening may crack the fill valve or tank causing flooding. Make sure the float
cup does not touch the tank walls or tank lever and flush valve.
*
STEP 5:
INSTALL NEW FILL VALVE
(CONT’D)
NOTE: If refill tube is too long to fit inside
tank with lid closed, cut tube.
Push refill tube onto refill clip, then attach refill
clip to flush valve overflow pipe.
Reuse original refill clip.
Do not use Fluidmaster
®
refill clip.
FOR AMERICAN STANDARD
®
CHAMPION 3:
Scissors
(Optional)
Refill Tube
Fill Valve
Flush Valve
Lever Arm
Refill Tube
Fill Valve
Flush Valve
Lever Arm
Push refill tube onto refill clip.
Attach refill clip to right side of overflow pipe so
the refill tube points into the pipe, not the tank.
FOR AMERICAN STANDARD
®
CHAMPION 4:
Water Level
Top of
Overflow Pipe
Overflow Pipe
1/2"
Summary of Contents for PerforMAX K-400H-5002
Page 13: ...24 25 NOTES NOTAS...
