
20
System Setup
DIGITAL OUT
1. If Digital Output (selecting the digital audio output format from the COAXIAL jack) is
selected, press the direction button to enter. Press the , buttons to select “OFF”,
“PCM” or “RAW” to match the decoding system of your connected external audio
amplifiers (For details,refer to the instruction manual of your external amplifiers).
2. Press the SETUP button to save the setting and exit.
DOWN SAMPLING
Turn on or turn off the down sampling.
CUSTOM SETUP
Press the , buttons to select Parental Ctrl and Password, then press the direction
button to enter.
1. If Parental Ctrl. is selected, press the direction button to enter. Press the , buttons
to set the rate level as shown below, then press the ENTER button. The Password menu
will appear on the screen. Enter the four digit password using the number buttons (0-9).
Press the SET UP button to save the setting and exit.
Rate levels: 1: Kidsafe
2 :
G , All ages
3 :
PG, Parental Guidance
4:
PG-13, Parental Guidance less than 13 years old
5:
PG-R, Under 17 years old, Parental Guidance suggested
6:
R, Under 17 years old, Parental Guidance strongly
7:
NC-17 years old and above
8:
ADULT, Adult only
2. If Password is selected; change the password as follows:
A. Press the direction button to enter. The column will be highlighted.
B. Enter the 4 digit current password using the numeric buttons.
C. Enter the 4 digit new password using the numeric buttons.
D. Enter the new password again.
E. Press the SETUP button to save the settings and exit.
MISC SETUP PAGE:
Press the , buttons to select USE DEFAULT setting or SCREEN SAVER, then press the
ENTER button to enter.
1. If USE DEfAULT is selected; press the ENTER button to confirm, then press the
direction button to select YES or NO, then press the ENTER button to confirm.
Notes:
• If YES is selected; the settings in the setting menu will be reset to default settings.
(Except rating level settings).
• If No is selected, exit without any changes.
2. If Screen saver is selected; press the direction button to enter. Press the , buttons
to select ON or OFF then press the ENTER button to confirm your selection. Press the
SETUP button to save the setting and exit. When set to ON, the screen saver will come
on when the unit stops or the image is paused for a few minutes. When the settings are
OFF, the screen saver will not come on.
The default password is”8888”.
If you change the password, be sure to remember the new password!
Summary of Contents for 8004576
Page 2: ......