Fluid Management Customer
Service 1 . 800 . 462 . 2466
16 | Accutinter 7000HS
1
Raise the top cover of the
Accutinter so you can see
the
canisters inside.
Getting Started
Preparing and refilling the canisters
After your machine is installed in the proper location, you need to fill the canisters with colorant so you
can dispense for the first time. Your machine may be shipped with a small amount of
glycol or colorant in
the
canisters already, but you need to fill them to capacity with colorant. When re-filling canisters, you will
follow the same process using steps 3-8. Canisters come in varying capacities. Check the label inside
the top cover for capacity and colorant locations.
DO NOT
overfill the
canisters. After the
canisters are
filled, ColorPro (or your manufacturer’s software) must be updated (See page 17).
•
Cautions
• DO NOT operate the
dispenser until it is in a
permanent location.
• DO NOT dispense if
canisters are empty
• Before dispensing colorant
for the first time, you
must complete a manual
dispense.
• DO NOT dispense without a
container in place.
• DO NOT use shelf surface to
seal open cans.
2
Remove the caps from
each canister one at a
time and prepare to fill
them with
colorant.
Summary of Contents for Accutinter 7000HS
Page 2: ......
