RAZR
USER MANUAL
ASSEMBLY
&
MOUNTING
INSTRUCTIONS
6
1
Unbox hardware from packaging and place on flush, stable surface.
Take extra caution with RAZR—ensuring the LED array does not
come in contact with sharp objects or force that may damage the
diodes.
1
.........
To change fixture width, place RAZR on firm surface with
LEDs facing down. Use the supplied #20 torque wrench to
loosen 4 screws at the end of the fixture. Loosen 4 screws
near the power supply, and the 4 screws on the backplate.
With these screws loosened, you can now adjust the fixture’s
width from 15.75” up to 22.75”. When fixture has been appro-
priately adjusted, re-tighten the 16 screws.
2
........
RAZR can be mounted using universal attachment brackets
(tips facing up) in holes at either end of fixture.
3
........
Alternatively, cantilever brackets can be installed and used to
mount RAZR to a standard slot rack. To install cantilever
brackets, attach at back sides with #20 torque wrench and
three screws per bracket. When mounting RAZR to a Danish
trolley/slot rack, use fine-angle level adjustment device to
adjust the angle of the fixture.
4
........
To dim RAZR, attach the appropriate dimming cables to a
dimming system.
For detailed instructions for assembling and mounting RAZR, please
see video turtorials at www.fluence.science/support/.
How to apply your vinyl-cut Fluence sticker:
1
.........
Clean and dry the surface where the sticker will be applied.
Air and surface temperature should be between 40° to 90° F.
2
........
Remove backing sheet to expose adhesive and apply sticker
to desired surface.
3
........
Starting from the center and working outward, squeegee
pre-masked surface with a credit card to remove air bubbles.
4
........
Allow adhesive to bond approximately 15 minutes.
5
........
Remove pre-mask from sticker at a 45° angle, keeping it as
close to the sticker as possible. If lettering is coming up with
pre-mask, re-squeegee before attempting to remove.
Last, and most important, please recycle all packaging
material. Future generations will thank you.
3
2
