FLS WT675 Installation Instructions Download Page 4

Page: 4 / 4

WT675 Wet-Tap Insertion Assembly

4. Remove electrode by grasping rod in one hand and rotating electrode cartridge 1/4 turn
then pull apart to release electrode cartridge.

F.I.P.

Formatura Iniezione Polimeri S.p.A.

Loc. Pian di Parata, 16015 Casella (GE) – Italy

Tel +39 010 96211 – Fax +39 010 9621209

www.flsnet.it

Summary of Contents for WT675

Page 1: ...may be mounted in any position even with the electrode s surface facing upwards As supplied the system consists of the PH655 CD Combination pH Electrode or the ORP655 CD Combination REDOX Electrode an...

Page 2: ...mbly by pushing electrode large end of rod and rotate to align connector After engaging connectors rotate 1 4 run to lock electrode in place 5 Insert rod into body assembly until o ring face seal seal...

Page 3: ...es of BNC in cap Press firmly then turn 1 4 turn to lock in place 3 Removal 1 Remove cable assembly Reverse of step 7 in mechanical installation on page 2 Loosen the hex nut and retract rod into body...

Page 4: ...e by grasping rod in one hand and rotating electrode cartridge 1 4 turn then pull apart to release electrode cartridge F I P Formatura Iniezione Polimeri S p A Loc Pian di Parata 16015 Casella GE Ital...