WT675 Wet-Tap Insertion Assembly
1
WT675 Wet-Tap Insertion Assembly
INSTALLATION INSTRUCTIONS
EN 02-05
1. Introduction
The Insertable Flat Surface pH Electrode system is designed to be inserted through a 1"
full port Ball valve (user supplied). The assembly may be mounted in any position (even
with the electrode’s surface facing upwards).
As supplied, the system consists of the PH655 CD Combination pH Electrode (or the
ORP655 CD Combination REDOX Electrode) and the WT675 Insertion Assembly.
2. Installation
1. Unscrew the hex nut from the adapter body and retract rod into body until you hear a
“CLICK”.
2. Unscrew the white or black nut from the adapter body and pull out the insertion tube and
the parts mounted on it.