QS302100 Rev. A
7
|
B.
Select the Decimal Points Location
The decimal point may be set to as many as five decimal places. Use the Decimal Point feature to
position the decimal point for all values displayed. Placement of the Decimal Point can influence the
displayed output of your process. For example, setting a scale of 0 to 100% can be show in three
different methods:
Method #1
0% to 100%
Reads to the ones place and is not very accurate
Method #2
0.0% to 100.0%
Reads to the 1/10’s place and provides good
accuracy
Method #3
0.00% to 100.00%
Reads to the 1/100’s place. The accuracy is very
good but may not be practical
When selecting a decimal point, take into account the practical scale for reading the level of liquid.
To set the Decimal Point:
1) Press the
MENU
button to bring up the SETUP/Input screen.
2) Press
Up Arrow
button to bring up SETUP /Display screen.
3) Press
ENTER
button to bring up DSPLAY/Units screen.
4) Press
Right Arrow
to bring up DSPLAY/decpt screen.
5) Press
ENTER
to bring up DECPT/XXXXXX.XX screen.
6) Use the
Right Arrow
or
Up Arrow
to change the location of the decimal point. The location of the
decimal point can be seen on the bottom display. Note: typical applications will set the decimal point to
the 0, 1 or 2 location.
7) Press
ENTER
button to save your selection.
8) Press
MENU
button twice to return to Main Screen.
