FlowLine DataLoop LI23-1001, Instruction Manual, Page: 22 / 48

DataLoop™ LI23 Loop-Powered Process Meter
Instruction Manual
22 MN302100 Rev 3
Changing What is Displayed (
TOP
and
BOTTOM
)
The two display lines (
Top
and
Bottom
) can be programmed to display different values. Use the
Top
and
Bottom
menus to make these changes. Additional menus are available if the meter is in dual-scale mode
to allow the second PV to be displayed on either the top or bottom line.
The top line (
TOP
) can display:

Process Value (PV)

Process Value 2 (dual-scale only; see
PV 2 under advanced features menu)

Alternating PV and Units

Alternating PV and Tag

Alternating PV, Units, and Tag

Tag

Stopwatch

Open Collector 1 or 2 Timer

Relay 1 or 2 Timer

Minimum Value, Maximum Value, or
Both

Off (Blank)

Units
The bottom line (
BOTTOM
) can display:

Units

Process Value (PV)

Process Value 2 (dual-scale only; see PV 2
under advanced features menu)

Alternating PV and Units

Alternating PV and Tag

Alternating Tag and Units

Alternating PV, Units, and Tag

Tag

Stopwatch

Open Collector 1 or 2 Timer

Relay 1 or 2 Timer

Off (Blank)

PV’s Percentage of Full Scale

The mA Input

The mA Output
DSPLY
TOP
DSPLY
PV
PV+UNIT
PV+TAG
PV+U+TAG
TAG
TIMR OC1
STPWATCH
TIMR OC2
TIMER R1
TIMER R2
MIN
MIN MAX
MAX
UNITS
OFF
DSPLY
BOTTOM
DSPLY
UNITS
PV+UNIT
PV+TAG
PV+U+TAG
TAG
TIMR OC1
STPWATCH
TIMR OC2
TIMER R1
TIMER R2
OFF
mA IN
PV PCT
mA OUT
PV
Top Line Display Parameters Bottom Line Display Parameters