27 AUG 08
PRELIMINARY MANUAL
47 of 57
Rev 1_3
Commander LI90 Series
o
To change a value, first press the Enter key
•
The value will be highlighted
•
Use the 10-digit keypad to enter the desired value
•
I.e. for 123.4, press the following keys: <F1>, <F2>, <F3>, <. >,
<F4>,
•
Press Enter when completed to store this value to memory
•
Follow the sequence above:
•
1. Press Enter to begin
•
2. Press F1 for number 1
•
3. Press F2 for number 2
•
4. Press F3 for number 3
•
5. Press
▼
for “.”
•
6. Press F4 for number 4
•
7. Press Enter to save setting
•
The screen cannot change until a value is stored in memory.
o
Use the Next soft key to advance to the next setting
o
Use the Back soft key to return to the previous setting
o
Option – Relays 5 and 6 can be used as a Duplex / Alternation function
o
Select Config. Relay #5 and #6 to configure relays #5 and #6. This setting will
always configure both relays #5 and #6.
