26 Instruction Manual
4.13 How to use the system locker
The system locker provides a means of preventing inadvertent configuration changes or
totalizer resets.
When the system is locked, menu window browsing can be done without affecting any
change, but any modifications are prohibited.
The system can be locked without a password or with a 1 to 4 digit password. W ith a
no-password locking, directly press the ENT key in M47
If the password is forgotten, please contact the factory.
4.14 How to use built-in data logger
The data logger has a 24K bytes memory and can hold about 2000 lines of data.
Use M50 to turn on of the data logger and selecting items that is going to be logged.
Use M51 for the times when the logging begins and at how long an interval sustains and
how long the data logging will last.
Use M52 for the direction of logging data. The default setting will permit the logging data to
be stored in the logger buffer.
Logging data can be redirected to the RS-232C interface without being stored into the
logger buffer.
Use M53 to view the data in the logger buffer.
Dumping the logging data through the RS-232C interface and the clearing of the buffer can
be operated with a function in window M52.
