52 - Manual Turner DHT125 Hometrainer
5. General information
Problem:
During a training the hometrainer makes squeaky noises
Solution:
Beeping or scratching noises are mostly caused by a plastic cover hitting the metal
frame or post. You can easily solve this problem to spay WD40 oil onto these parts.
In case your problem is not resolved or not described, consult the fitness reseller
where you purchased this product.
Problem:
The computer is not responding correctly.
Solution
Remove the batteries from the back of computer and re-install them. If the problem
continuous please contact your reseller.
Problem:
It isn’t possible to connect the upper and lower resistance cables and complete
assembly step 3 (figure b).
Solution:
Set the resistance knob on the highest level, this results into the longest setting for
the upper cable. Now it is easier to place the hook into the metal holder as displayed
on page 38. If necessary use a pair of tweezers.
Problem:
The starting resistance is to hard or easy.
Solution:
Behind the handlebar post there is a connection between the upper and lower
resistance cable. To access this connection the handlebar post needs to be removed
from the main frame. See page 38. The connection contains a red tube that can be
rotated to adjust the tension within the resistance cable. Rotate this tube to increase
or decrease the starting resistance.
In case your problem is not resolved or not described, consult the fitness reseller
where you purchased this product.
5.3 Troubleshooting
