TOPPER
*Your canopy top has been folded for shipping in a way that makes it easy to set up. Please read
these directions before unfolding topper.
1
. Beginning at one gable end of the roof frame, unroll top along the ridge poe, le
tt
ing the ends hang
down over either end of the frame.
2.
Unfold top, stretching it out over the entire roof frame and aligning the corners with the corner
joints of the frame.
*Instructions for re-folding the top at the end of the show can be found on page 9.
3
. With the top stretched over the frame, li
ft
the valance along the front edge and a
tt
ach the Velcro
straps around the frame pole to hold the top in place as you li
ft
the canopy. (The rest of the straps
will be easier to a
tt
ach a
ft
er the legs are put in place.)
5
Vents:
Now is the easiest time to access the heat/wind vents, although they may be opened or closed at
any time, from inside or outside the canopy. From the outside, simply roll up and secure against the
Velcro strips. From inside, separate the bo
tt
om Velcro strip and reach through to roll up.
