Flotec Autojet60 Owner'S Manual Download Page 13

13

L100235 - Autojet & Multimax Owner’s manual  |  Copyright© Pentair Australia Pty Ltd 2017

Pentair Australia Pty Ltd ACN 004 856 204 and its related entities (“Pentair”) warrants that, subject to the terms  and condi-

tions below, when it’s products are used for the purpose for which they were designed, they will be free of material and 

manufacturing defects at the time of the original purchase.  Any defects found in the products should be reported as soon as 

the fault is discovered.

In Australia:

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.  You are entitled to a replace-

ment or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.  You are also 

entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to 

a major failure.

TERMS AND CONDITIONS APPLICABLE IN AUSTRALIA AND NEW ZEALAND YOU MUST 

CAREFULLY READ THE INSTRUCTIONS SUPPLIED PRIOR TO USING ANY PENTAIR PRODUCT. 

All products are to be installed and operated in accordance with the instructions provided.  This warranty will not apply if any 

product is used in a manner other than in accordance with the instructions.

1.             What does the warranty cover

Pentair warrants its products to be free of defects in material and workmanship during the warranty period.  If a product 

proves to be defective in material or workmanship during the warranty period, then Pentair will, at its sole discretion repair or 

replace the product with a like product.  Replacement products or parts may include re-manufactured or refurbished parts or 

components.

2.             How long the warranty is effective internationally

This Pentair product is warranted for 24 months for all parts from the date of the first consumer purchase. Should any parts 

fail as a result of a defect in material or workmanship within the specified period, the part will be replaced free of charge. 

(This does not include travel charges, removal and reinstallation charges.)

3.             How long the warranty is effective locally

i)  

Please refer to the Warranty Schedule detailing the warranty period and coverage.

ii)  

All Pentair products warranties commence from the date of first consumer purchase.

iii)  

Where this Pentair product is sold for business purposes as defined in the relevant  

 

consumer protection law the warranty shall be for a period of six months from the date of purchase by the consumer.

4.             Who the warranty protects

This warranty is valid only for the consumer purchaser.

5.             How to claim the warranty

To claim under this warranty the consumer should immediately cease using the goods when an alleged product issue arises.  

For infield service, the consumer should promptly notify a Pentair local dealer, within thirty (30) days after discovery of an al-

leged product issue. Detailed warranty claim information will be requested at this time and must be supplied by the consumer.  

For a workshop warranty, the consumer should promptly return the product to a Pentair local dealer, within thirty (30) days 

after discovery of an alleged product issue. Detailed warranty claim information will be requested at this time and must be 

supplied by the consumer.  Your Pentair Service Agent may be found here: http://www.onga.com.au/dealerlocator

6.             What the warranty does not cover

i. 

Damage, deterioration or malfunction resulting from:

       a. 

Accident, misuse, negligence, fire, water, lightning, or other acts of nature, 

 

modification or failure to follow instructions supplied with the product;

       b. 

Repair or attempted repair by anyone not authorized by Pentair;

       c. 

Any damage to the product due to shipment;

       d. 

Removal or installation of the product;

       e. 

Causes external to the product such as electric power fluctuations or failure; 

       f. 

Use of supplies or parts not meeting Pentair specifications;

       g. 

Normal wear and tear,

       h. 

Product consumables.  i.e. mechanical seals, impellers, bearings, rings  gaskets and electrical cables.

       i. 

Any unauthorized changes or tampering or partial disassembly of the product;

       j. 

Water ingression   or exposure   to abnormal   corrosive   conditions,   abrasive  chemicals   or “run dry” condition

       k. 

Any other cause which does not relate to a product defect.

ii. 

Damage caused to the products arising from the use of another manufacturer’s product.

iii. 

Ingress of insects or invertebrates into the unit causing electrical malfunction.  Care should be taken to avoid  

 

this occurrence.

iv. 

Products other than products supplied by Pentair.

v. 

Products that are not installed in accordance with the owner’s manual.

vi. 

Products that are not installed by a suitably qualified person trained in the installation and operation of such   

 products.

vii. 

General Service and Maintenance

7.             Limitation of Liability

To the extent permitted by law, Pentair’s liability for breach of a guarantee  implied by any law in relation to goods Pentair sup-

plies  that are not of a kind ordinarily  acquired  for personal,  domestic  or household  use or consumption,  except  for implied 

guarantees as to title to goods supplied, a purchaser’s  right to undisturbed possession of goods supplied and undisclosed 

securities over goods supplied, is limited to the replacement of the goods, the payment of the cost of replacing the goods or 

the payment of the cost of acquiring equivalent goods.

 

WARRANTY

Summary of Contents for Autojet60

















Reviews: