14
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
Remove the internal diffuser (O) by unfastening the screw (N) and by sliding-out the rod
(H).
Assemble now the new spare-part:
Assemble the diffuser by inserting the rod (H) through the lateral holes and by tighten
the screw (N) onto the end side of the rod (H).
EN
Fig.2
ONTHEROCKS HL
F4651000
N
O
H
REV. 1
DATE 27/07/2021
RF4651200
ROD ASSEMBLY
