Diagram of Parts
14
Using the Remote Control
15
Remote Control (27 MHz)
Use the 27MHz remote control to drive the Aqualand Cruiser on land
and in water, and to convert it from a car with wheels to a boat with
propellers.
1. Ensure fresh batteries have been installed in the remote control and
that the Aqualand Cruiser battery pack is charged. (See Battery
Installation and Charging the Battery Pack.)
2. To turn the power on, turn the Aqualand Cruiser
POWER
switch to
the
ON
position.
3. To turn the remote control on, slide the
ON/OFF
switch to
ON
. The
POWER INDICATOR LIGHT
on the remote control illuminates.
4. Aim the remote control at the receiver on the back of the car.
5. Use the remote control
RIGHT MOVEMENT CONTROL
and
LEFT
MOVEMENT CONTROL
to move and steer the Aqualand Cruiser.
(See Using the Movement Controls.)
6. When the Aqualand Cruiser is in water, you can convert the wheels
into water propellers by pressing the
LAND TO WATER
button. To
convert the water propellers back into car wheels, press the
WATER
TO LAND
button.
Battery
Compartment
(on the back)
Power Indicator Light
On/Off Switch
Right Movement
Control
Left Movement
Control
AL Cruiser booklet 8/2/05 1:51 PM Page 15
