10
Installing the Battery Pack
3. Attach the battery pack connector to the Aqualand Cruiser’s matching
connector. The connectors fit together one way; do not force.
4. Place the battery into the battery compartment first, then carefully put
the battery wire and connector on the top of the battery. Then
replace the battery compartment cover and secure it by returning the
latches to their original position.
Installing the Remote Control Battery
The remote control uses two AA batteries (purchase separately).
1. Prior to battery installation, turn the
POWER
switch to the
OFF
position.
2. To loosen and remove the battery compartment cover, use a
Phillips screwdriver (not included). (See Figure 1.)
3. Insert the AA batteries, observing /- polarities as indicated.
11
Installing the Remote Control Battery
4. To replace and tighten the battery compartment cover, use a
Phillips screwdriver (not included). (See Figure 2.)
Note:
When the range of the remote control decreases, replace
the battery.
Figure 2
Figure 1
AA
AL Cruiser booklet 8/2/05 1:51 PM Page 11
