5
GB/CY
Aluminium Garden Table
Introduction
We congratulate you on the purchase of your new
product. You have chosen a high quality product. Fa-
miliarise yourself with the product before using it for
the first time. In addition, please carefully refer to the
operating instructions and the safety advice below.
Only use the product as instructed and only for the
indicated field of application. Keep these instructions
in a safe place. If you pass the product on to anyone
else, please ensure that you also pass on all the doc-
umentation with it.
Intended use
This product is suitable for personal use with a max.
load of 25 kg. This product is not intended for com-
mercial purposes. This product was manufactured for
private residential use.
Scope of delivery
1
1 x Tabletop
2
2 x Table frame, long side
3
1 x Table frame, short side
4
1 x Table frame with high adjustment device
on the short side
5
2 x Strut
6
16 x Screw
7
16 x Washer
8
16 x Cover cap
9
1 x Key
10
18 x Silicone cap
Technical Data
Dimensions: approx. 144 x 74 x 92 cm (W x H x D)
Weight:
approx. 21.5 kg
Max. load: 25 kg
Safety Notices
DANGER TO LIFE
AND RISK OF ACCIDENTS FOR
INFANTS AND CHILDREN!
Never leave children
unsupervised with the packaging materials. The
packaging material poses a suffocation hazard.
Secure the product in extreme weather, e.g. strong
wind.
Verify the product is stable before use.
Set the product on a level, firm surface.
This product is not a toy and should only be used
under adult supervision.
Check the product for damage before using it.
Please note the maximum weight capacity of 25 kg.
Exceeding this weight limit may result in injuries
and / or property damage.
Do not sit or stand on the product.
Do not fix an umbrella to the edge of the table
under any circumstances. This could result in
injuries and / or damage to the product.
Assembly instructions
1. Place the tabletop
1
on a soft, flat surface during
assembly (
Caution:
hard surfaces may scratch
the tabletop).
2. Connect the long frame section of the table
frame
2
to the short frame section
3
(see fig. B).
Now take 4 screws
6
and screw them into the
holes using the key
9
. Secure the screws with the
washers
7
and cover caps
8
, as shown in figures
B and C.
3. Repeat this process on the opposite side of the table.
4. Place the two struts
5
on the table frame and
connect them using 4 screws
6
each.
5. Place the 18 silicone caps
10
into the matching
holes on the table frame.
6. Carefully lay the tabletop
1
on the table frame.
7. Adjust the height of the table by using the leg with
adjustable height for maximum stability.
Cleaning and Care
Clean the product and remove stains with a damp
cloth and a mild cleaner.
