FLORABEST FRP 350 B1 Translation Of Original Operation Manual Download Page 10

10

GB IE

cord to the pump carrying handle (   1).

  Do not hang the equipment directly 

by the curved tube or on the water 

hose.

•  You can adjust the height of the plastic 

hook after loosening the height-adjust-

ment screw (   16). 

•  When the water level is low, you can 

also place the pump in the butt. If you 

do, the shut-off tap must be above the 

level of the edge of the container. 

Power supply connection

The rain barrel pump you have acquired 

is already fitted with a home office 

(safety) plug. The pump is intended to be 

plugged in to a home office socket with a 

230 V ~ 50 Hz supply. 

Switching on and off

1.  Insert the plug in the socket. The 

pump starts working immediately. 

2.  Open the shut-off tap  

(   18). 

3.  To switch off, withdraw the plug from 

the socket. The pump stops.

  If the water level is too low, the 

float switch will automatically 

switch off the pump.

  Supervise the appliance while it is 

in operation in order to be immedi-

ately aware if the automatic cut-out 

operates or the pump runs dry, to 

limit any damage to a minimum. 

Adjusting the float switch

Automatic mode:

The on or off switching point on the float 

switch (   5) can be continuously ad-

justed.

  Loosen the screw on the float 

switch height adjustment (2) and 

bring it into the required position 

(arrow   has to show upwards). 

  Check the float switch (5). It must 

be positioned so that it can lift and 

lower freely. The switching point 

heights “On” and “Off” must be 

easy to reach.

Manual mode:

The pump runs continuously in manual 

mode.

  Position the float switch (5) as 

shown.

Cleaning and storage

Clean and service your appliance on a 

regular basis. This will guarantee its opti-

mum performance and a long service life. 

  Ask our service centre to carry out 

any work that is not described in 

these instructions. Use only origi-

nal parts. 

  Pull out the power plug before every 

maintenance operation. There is a 

risk of electrocution or of injury from 

moving parts.

General cleaning work

•  Clean the pump after every use with 

clean water. 

•  Remove fluff or particles of fibre, which 

may have found their way into the pump 

Summary of Contents for FRP 350 B1



















Reviews: