FLORABEST FRM 1200 D3, Original Operation Manual

Page: 10 / 36

10
GB IE
Operation
Hanging On / Removing the
Grass Box
E
1. To hang on the grass box (4),
lift the collision guard (7) and
hang on the grass box. Fold the
collision guard (7) onto the grass
box (4). It holds the grass box in
the correct position.
2. To remove the grass box (4),
lift the collision guard (7) and
detach the grass box. Fold the
collision guard (7) back onto the
mower housing (6).
The level gauge ( D 20) is located on the
side of the grass catcher (4).
Flap ( D 20) open:
grass catcher (4) empty
Flap ( D 20) closed:
grass catcher (4) full
Adjusting the Cut Height
Switch off the equipment, discon-
nect the plug and wait for the blade
to stop. There is a risk of injury.
The lawn mower can be set to the follow -
ing cut heights by means of three position
changes of the front and rear wheels, ad-
justing the individual wheels:
The single wheel adjustment has
always to be at least at one axis.
60 mm - Tall cutting height
40 mm - Medium cutting height
20 mm - Short cutting height
F
1. Unscrew the wheels (5).
2. Screw the wheels (5) back on in
the desired position. The single
wheel adjustment has always to
be at least at one axis
The correct height is around 25 – 40 mm
for a decorative lawn and around 30 – 60
mm for a used lawn.
A higher cut height should be se-
lected for the first cut of the season.
Observe the noise protection and
local regulations.
Switching On and Off
1. Insert the power cable plug into
the socket (
A
9) on the curved
handle (
A
1).
2. Connect the equipment to the
power supply.
3. Before switching on, ensure that
the equipment is not in contact
with any objects.
4. To switch on, press the release
button (10) on the handle at the
same time as pressing the start
lever (11). Release the release
button (10).
5. To switch off, release the start
lever (11).
After switching off the equipment,
the blade continues to turn for sev-
eral seconds. Do not touch the mov-
ing blade. There is a risk of injury.
Working with the
Lawnmower
Regular mowing encourages increased foli-
ation of the grass and kills off weeds at the
same time. Therefore, not only does each
mowing increase the density of the lawn, it