41
MT
GB
two blocking apertures appears. Now
block the blade plate (16) by slotting
the screwdriver right through it.
• Use the Allen wrench (15) to unscrew
the screw (17) in the blade plate (16)
and remove the blade (18).
To assemble the blade you must
use a new screw and tighten it with
an torque of 16 Nm.
Maintenance and cleaning
Leave all work not described in
this manual to an authorised cu-
stomer service centre. Only use
original parts.
Wear hand protection when work-
ing on the blade.
Before starting to service or clean
the unit, turn off the unit, pull the
power plug, and wait until the blade
stands still. Risk of injury from elec-
tric shock, fire and rotating blades.
General cleaning and servicing
Do not spray water onto the
shredder. Electric shock hazard.
• Always keep the shredder, wheels and
air vents clean. Use a brush or cloth to
clean it, avoid cleaners and solvents.
• Always check that the shredder and
especially the guards are not worn
down or damaged but firmly attached
before use. Check that the nuts, bolts
and screws are tight.
• Check the covers and guards for dam-
age and improper attachment. If nec-
essary, change the components
• Keep the shredder in a dry place out
of children’s reach. Do not cover the
shredder in nylon bags, as moisture
may develop.
Replacement parts
Replacement parts can be ordered direct-
ly from our service centre (see address on
page 57). In your order, quote the equip-
ment type and position number in the
exploded view.
Screw........................................ 91097183
Blade ........................................ 91093080
Waste disposal and
environmental protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Machines do not belong with do-
mestic waste.
Hand over the device at an utilization lo-
cation. The plastic and metal parts emplo-
yed can be separated out into pure mate-
rials and recycling can be implemented.
Ask your Service Center about this.
Guarantee
• We provide a 36-month guarantee on
this unit, or 12 months for commercial
use according to the statutory regula-
tions in Germany.
If you have reason to launch a claim
on guarantee, please call our serv-
ice centre (see page 57 for our tel.,
fax and e-mail address). They will
give you further information on the
complaints management process.
• The guarantee does not cover damage
from natural wear, overloading or im-
proper use. Certain components, such
as the blade are subject to normal
wear and are not covered by guaran-
tee.
