FLORABEST FLV 1200 A1, Translation Of Original Operation Manual

Page: 6 / 108

6
GB
Weight ....................................... 9.9 kg
Acoustic pressure level (LpA)
....................... 84 dB (A); KpA= 3 dB (A)
Measured sound power level (LwA)
.......................99 dB (A); KwA= 4 dB (A)
Guaranteed sound power level
............................................ 103 dB (A)
Vibration (an) ..............4 m/s
2
; K= 2 m/s
2
The noise and vibration values were estab-
lished by the standards and stipulations
listed in the Conformity Declaration.
Technical and visual changes can be com-
pleted in the course of further development
without notification. Consequently, all
dimensions, references and details in these
Operating Instructions are without guar-
antee. Consequently legal claims based
on these Operating Instructions cannot be
asserted.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at protect-
ing the user should be based on esti-
mated exposure under actual usage
conditions (all parts of the operating
cycle are to be considered, includ-
ing, for example, times during which
the power tool is turned off and
times when the tool is turned on but
is running idle).
Safety precautions
This section covers the basic safety instruc-
tions when working with this implement.
Symbols on the implement
WARNING!
These Instructions must be read!
Danger of injury due to flung-out
material! Keep bystanders well
away from the implement.
Danger of electric shock
if the power cable is dam-
aged! Always ensure that
the power cable is kept well
away from the implement
and its cutting tools!
Wear eye and ear protection.
CAUTION – Sharp tools: Ensure
that the hands and feet are kept
well away from the cutting tools.
The cutting cylinder continues to
rotate briefly after the motor has
been switched off!
Always disconnect the plug from
the mains prior to maintenance
work or if the power cable is
damaged!
Caution with steps! Turn off
the power when the implement
is to be carried across steps!
Noise level ratings L
WA
in dB(A).
Protection Class II