FLORABEST FARAT 40-Li A1, Operation And Safety Notes

Page: 6 / 36

Q
Technical data
Cordless grass
trimmer: FARAT 40-Li A1
Rated voltage: 40 V
Rated no load speed n
0
: 7200 min
-1
Cutting width: 300 mm
Weight (incl. accessories): 3.38 kg
Battery pack: FAP 40 A1
Type: Lithium ion
Rated voltage: 36 V
40 V max.
Capacity: 2.5 Ah (90 Wh)
Number of cells: 10
Rapid battery
charger:
FLG 40 A1
INPUT:
Rated voltage, frequency: 200 – 240 V~,
50 / 60 Hz
Power consumption: 160 W
OUTPUT:
Rated voltage:
36 V
Charging current: 3.6 A
Charging time: approx. 60 min
Protection class:
II /
Noise emission value
Noise measurement value determined in
accordance with EN 50636-2-91.
The A-rated noise level of the power tool is
typically as follows:
Sound pressure level L
pA
: 75.5 dB(A)
Uncertainty K
pA
: 3 dB
Sound power level L
WA
: 93.3 dB(A)
Guaranteed sound power
level L
WA
: 96 dB(A)
(according to 2000/14/EC amended by
2005/88/EC)
Vibration emission value
Total vibration values (vector total of three
directions) determined in accordance with
EN 50636-2-91:
(rear handle)
Hand / arm vibration a
h,W
: < 2.5 m/s
2
(1.61 m/s
2
)
(front handle)
Hand / arm vibration a
h,W
: < 2.5 m/s
2
(1.31 m/s
2
)
Uncertainty K: 1.5 m/s
2
WARNING!
Wear ear protection!
WARNING!
u
The vibration level varies in accordance
with the use of the power tool and may
be higher than the value specified in these
instructions in some cases. There is a risk of
underestimation of the vibration load if the
power tool is used regularly in this manner.
Try to keep the vibration loads as low as
possible. Measures to reduce the vibration
load are, e. g. wearing gloves and limiting
the working time. Wherein all states of
operation must be included (e. g. times when
the power tool is switched off and times
where the power tool is switched on but
running without load).
NOTE
u
The vibration level specified in these
instructions has been measured in
accordance with a standardised measuring
procedure specified in EN 50636-2-91
and can be used to make equipment
comparisons. The specified vibration emission
value can also be used to make an initial
exposure estimate.
8 GB / IE / NI