10
11
- Check that the delivery is complete (see”3. Scope of delivery”).
- Check to see if the garden hose or the parts are damaged. If so, do
not use the garden hose. Contact the manufacturer at the indicated
service address.
7. Use
Attach the irrigation sprayer
- Screw the coupling piece
5
onto the hose
1
, if necessary.
- Slide the thumb lever
9
forward to “CLOSE” to close the irrigation sprayer.
- Connect the irrigation sprayer
6
to the coupling piece
5
. To do
so, pull the exterior ring downwards, insert the irrigation sprayer
6
and release the ring.
Connect the water tap
- Turn the tap closed.
- If your tap has a 1/2” external thread, screw the reducer adapter on
4
.
- Screw the plug system
3
onto the tap or the reducing adapter
4
.
- Check the tightness.
- Connect the coupling piece
2
to the plug system
3
. Then, pull the
outer ring downwards, insert the coupling piece
2
and release the
ring.
Operation
- Unroll the Garden Hose
1
completely before use.
- Turn on the tap only a little at first and increase the water pressure
evenly. The garden hose will roll out.
- Once the Garden Hose is completely unrolled, open the valve on the irri-
gation sprayer
6
over the thumb lever
9
by turning it back to “OPEN”.
- To adjust the bundling of the water jet, use the control tip
8
of the
irrigation sprayer
6
.
- To regulate the strength of the water jet, use the thumb lever
9
on
the irrigation sprayer
6
.
Thumb lever forwards: “CLOSE”
Thumb lever back: “OPEN”
- Once you no longer need the Garden Hose, shut off the water sup-
ply by turning off the tap.
- Open the valve by turning the thumb lever
9
to “CLOSE” and allow
the remaining water to run off. After the water has drained, the Gar-
den Hose will return to its original length.
Water-stop function
- The coupling
5
is equipped with a water-stop function. This makes
it possible to remove the irrigation tip from the coupling piece
5
when the tap is open. The water flow is automatically stopped by the
water-stop function.
- Coupling with inner cross
5
Water-stop function - Installation on the
side of the irrigation tip
6
.
- Coupling without inner cross
2
- Mounting on the tap side.
8. Cleaning and care instructions
!
CAUTION!
Damage to property!
Improper handling of the hose can lead to damage.
- Do not use aggressive cleaning agents, brush with metal or nylon
bristles, or sharp or metallic cleaning items, such as knives, hard spat-
ulas, etc. They may damage the surfaces.
- Clean the product with a lightly dampened, lint-free cloth.
9. Disposal
The packaging and operating instructions are made of 100 %
environmentally friendly materials, which you may dispose of
at local recycling centres.
Please find out about disposal options for the product from your local
authority or town administration.
10. Warranty
Warranty of the Tradix GmbH & Co. KG.
Dear customer, this device comes with a three-year warranty, valid from
GB/IE/NI
GB/IE/NI
