FLORABEST 275666, Translation Of The Original Instructions

Page: 6 / 35

■ 2 │
GB
│
IE
FAAS 12 A1
CORDLESS BRANCH SAW
FAAS 12 A1
Introduction
Congratulations on the purchase of your new ap-
pliance. You have selected a high-quality product.
The operating instructions are part of this product.
They contain important information on safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the specified areas of application. Please also
pass on these operating instructions to any future
owner.
Intended use
This appliance – standard designation: reciprocat-
ing saw – is intended for the sawing of wood,
plastics and building materials up to a fixed stop
(base plate). The appliance is suitable for rough
sawing work, straight and curved cuts; it cuts sur-
faces off flush. With the grip bracket mounted, the
appliance is suitable for sawing branches. Follow
the information concerning saw blades and prac-
tical advice on sawing. Any other uses of or modi-
fication to the appliance is deemed to be improper
and carries the risk of serious personal injury. The
manufacturer accepts no responsibility for dam-
age(s) attributable to misuse. The appliance is not
intended for commercial use.
Features
Safety lock-out
Handle
Battery pack
Release (battery pack)
ON/OFF switch
Saw blade
Base plate
Quick-release chuck
Hand guard
Release (grip bracket)
Grip bracket
High-speed battery charger
Control LED (green)
Control LED (red)
Battery charge level display
Test button
Package contents
1 cordless branch saw FAAS 12 A1
1 high-speed battery charger FAAS 12 A1-2
1 battery pack FAAS 12 A1-1
1 grip bracket
1 saw blade for wood 152 mm
1 carrying case
1 set of operating instructions
Technical data
Cordless branch saw: FAAS 12 A1
Rated voltage: 12 V
(DC)
Rated idle speed: n
0
0–2700 rpm
Stroke length: 20 mm
Max. cutting performance: Wood 80 mm
Battery pack: FAAS 12 A1-1
Type: LITHIUM ION
Rated voltage: 12 V
(DC)
Capacity: 1500 mAh
High-speed
battery charger:
FAAS 12 A1-2
INPUT:
Rated current: 230–240 V ~, 50 Hz
(alternating current)
Rated power consumption: 30 W
OUTPUT:
Rated voltage: 12.6 V
(DC)
Rated current: 1800 mA
Charging time: approx. 60 min.
Protection class: II / (double insulation)
Noise emission values:
Measured values for noise determined in accordance
with EN ISO 4871. The A-rated noise level of the
power tool at the working location is typically as
follows:
Sound pressure level:
L
pA
= 79 dB(A)
Uncertainty: K
pA
= 3 dB
Sound power level: L
WA
= 90 dB(A)
Uncertainty: K
WA
= 3 dB
Wear hearing protection!