![Floorpul Twin Top Series Operating Instructions Manual Download Page 8](http://html1.mh-extra.com/html/floorpul/twin-top-series/twin-top-series_operating-instructions-manual_2306779008.webp)
Operation
Safety Information
.
The Sweeping & Suction Machine may only be operated by
dependable persons.
Only deploy trained and instructed staff.
The areas or responsibility of staff must be clearly defined
Examine the Sweeping & Suction Machine before starting
and check serviceability and technical safety.
Driving
Starting the Sweeping & Suction Machine
Sit down in the driver`s seat
-
S
•
The Sweeping & Suction Machine cannot be started
if the driver's seat is not weighed down.
•
Check position of direction of motion switch.
For starting the motor the switch must be in neutral
position.
The direction of motion switch is a toggle switch
with three positions.
•
Insert the battery master switch into the socket.
•
Press it down and turn it clockwise until it is
firmly latched.
•
Now pull up the battery master switch.
•
Insert the key into the key switch.
•
Turn the key clockwise.
Adjustment of Driver`s Seat
Loosen the seat arresting device and shift the driver's seat
on the seat support to a position that feels comfortable to
you.
Do not use the machine in case of malfunctions of any kind.
Only drive on specifically assigned pathways and lots.
The Sweeping & Suction Machine is designed as a one-man
device.
Carrying along further persons or load is not permitted.
Control panel
Battery condition display
h
1/10
direction of motion switch
Pilot lamp
- forward motion
- reverse motion
battery master switch
key switch
.
-
-
-
- Forward motion:
- Reverse motion:
On the control panel a red LED starts flashing.
(This indicates machine ready for operation.)
After that the LED`s indicating the battery's
charging condition light up.
•
Depress the brake pedal.
•
Release the parking brake.
•
Actuate the direction of motion switch.
•
Push the direction of motion switch forward.
Optical signal:
Green pilot lamp on the switch
•
Push the direction of motion switch backward.
Optical signal:
Red pilot lamp on the switch,
Acoustical signal:
Beeper
The speed of the Sweeping & Suction Machine can be
adjusted with infinite variability by depressing the
accelerator.
Parking brake
Accelerator
Brake pedal
8