floorex Meteor 250 MkII, Operator'S Manual

Page: 8 / 28

Meteor 250 MkII
1800 356 673
7.
1800 - FLOOREX
Operating instructions
19. This machine is designed to operate with the wheels in contact with the
floor at all times. Do not operate with wheels off the floor.
20. Do not attempt to make any adjustments while the machine is in
operation. Any adjustments must only be performed when machine is
stopped and power disconnected.
21. In the event of the machine pulling to one side all the time; adjust the
axle height to obtain the best result. (See Axle Height adjustment).
22. After a few minutes of grinding check the wear of the diamond tooling.
This will pay handsomely if the diamonds are wearing out fast due to
soft concrete / abrasive concrete. FLOOREX has a wide range of
diamonds to suit every need. See page 12 and 13 for a guide.
23. See the chart on page 11 for tips on how to grind faster on tough
concrete and other ways problems can be rectified.
24. WARNING! Breathable silica may be generated by use and maintenance
of this machine. Silica can cause severe and permanent lung damage,
cancer, and or other serious diseases. Do not breathe the dust. Do not
rely on your sight or smell to determine if dust is in the air. Silica may be
in the air without a visible dust cloud. If air monitoring for silica is not
provided by your employer at your work site, you must wear appropriate
respiratory protection when operating or maintaining this equipment.
Consult your employer for proper respiratory protection.