floorex Meteor 250 MkII, Operator'S Manual

Page: 7 / 28

Meteor 250 MkII
FLOOREX- 1800
6
.
1800 356 673
Operating instructions
11. Connect machine to suitable power outlet. Only use heavy duty power
lead suitable for high current use (minimum 2.5 mm² cable), no longer
than 20 meters. (For petrol powered equipment, refer to engine manual
for startup procedure).
12. If no power is available within the specified distance, have a qualified
person install a suitable power outlet closer to your work. Alternatively
use 4mm² cable for up to 50 meters.
13. Connect a suitable dust extractor to the machine via a 5omm flexible
hose. The machine is designed to take the standard FLOOREX 50mm
hose ends to make connection of dust extractors easy and hassle free.
14. Keep machine clear of drainage pits and grates or any such hazard.
Failure to comply could result in bodily injury and or could damage the
machine or property.
15. Ensure machine is on a level surface and handle is not folded (see
Handle Positions ).
16. Switch on the dust extractor.
17. Hold the handles firmly and switch the machine on by pushing the green
button.
18. If the over-current device trips it indicates a problem. (Undersize power
lead or poor power to GPO outlet). Refer above for recommendations on
power leads. Rectify problem or decrease load on grinder by using
tooling with more surface area.
Continuing to use the METEOR 250 MKII
when constant tripping occurs, VOIDS THE WARRANTY!